2 minuten leestijd

Ikea hacking: Creating Magioder

Geplaatst op 14 augustus 2009

How the project started

Tired of replacing defect lamps and adapters of our tree Magiker lamps, we were searching for something else and came across Dioder.

We bought the lamp but found out Dioder would light our books too direct. After looking at the old Magiker lamps I decided to see if I could combine the two lamps.

Stripping Dioder

First I took apart the Dioder lamp because I wanted to keep the option to put in only one ore two Magioder lamps. I decided to use the connectors end the LED part (main board) of the original Dioder lamp.

Dioder frontThe front of one lamp.
Dioder backThe back of one lamp, turn the transparent part to separate the two.
Dioder two peecesNow you can separate the transparent part from the main board by placing a small screwdriver around the tips holding it in.
Dioder endconnector and mainboardYou only need the end connector and the main board.

The Magiker lamp was up next

From Magiker we need the cord and the shell of the lamp.

Cutting off the end connector of MagikerCutting off the end connector of Magiker.
Taking Magiker apartTaking Magiker apart.
Taking Magiker further  apartTaking Magiker further apart.

Magioder is taking shape

Now we can start putting the pieces back together.

IMG_1675

Connecting the Magiker connectors to the Dioder main board.

IMG_1677Place the Dioder main board in the Magiker case.
IMG_1679Cut the Dioder double tape in 9 pieces to you can connect the Magiker cap and the Dioder main board.
IMG_1680Place the double sided tape on the glass side of the Magiker cap. 3 pieces on top of each other should be high enough.
IMG_1684Place the glass back into the cap and put the plastic ring back on.
IMG_1687Put the Dioder connector on the Magiker cord. Word of caution here. You have to check to poles because the LEDS used in Dioder work like diodes, hence the name. You either to this when you screw the new main board into the cap or you do it when you connect the Dioder connector to the Magiker cord.

The end result

And this is the end result:

_MG_1699Hello Magioder!

Project facts and energy usage

So the lamps work again but there is another advantage.

Dioder details

  • Energy usage: 8,0 W
  • Average lifespan: 30.000
  • Price: €30,-

Magiker details

  • Energy usage: 20,0 W (per lamp)
  • Average lifespan: 1.500
  • Price: Not available anymore

Average usage

Our lamps burns an average of 4h a day, so we need new lamps every year. Dioder wil last 20 years. The energy usage of Magiker will be 20w x 3 = 87.9 kWh a year which translates to about € 17,58 a year at the current energy prices. The halogen lamps itself are € 0,75 /lamp, but I would still need two new adapters for Magiker which are not available anymore.

Dioder will use 11.7 kWh which is about € 2.34 a year and there are the costs of buying Dioder (€ 30,-).

Lets say I would have been able to repair the Magiker adapters and we would have used them for another 5 years. The TCO would have been around € 100,-. The new Magioder lamp will have a TCO of € 42,- which includes buying Dioder. Thats 50% less and it is better for the environment. What more do you want from a nice project.

Some final words

It took about 2 to 3 hours building Magioder. The light is more white than it looks in the pictures. Dioder is also available with leds that can produce seven colours. It will cost you an extra € 20,- . Dioder comes with 4 lamps by default. I only used three. Good luck building your Magioder!


Geschreven door Mark Vletter

Nieuwste: 18 vragen over het CIOT, onze boete en de rechtszaak daartegen beantwoord Van 22 april


Meer verhalen lezen?

In de afgelopen jaren hebben we veel geschreven over ondernemen, zelfsturend werken, de handigste tools en nog veel meer. Dus leef je uit!

Van 26 september

Koppel je online tools met je telefonie

Van 22 juli

Wel/niet bereikbaar tijdens je vakantie